CBR-10 electrostatically charging bars are designed to make a material adhere to a surface or two materials between them. These charging bars are connected to a generator, which creates (positive or negative) ions on bar’s pointed edges by means of high voltage. Thus the material, passing through the bar and a reference mass, is pushed towards the mass itself, creating a temporary adhesion.
CBR-10 charging bars are used in several industrial applications. They are safe, because each pointed edge is connected to high voltage by means of a resistance, so as to avoid sparkles and accidental discharges, which could damage the machine itself.
The installation of these antistatic bars is very simple, as bars have a rear seat, where nylon screws are inserted, thus granting their insulation from conductive parts.
• Very effective at high speeds
• Emitters resistively connected to high tension
• 10 mm emitter pitch
• Low consumption
• High reliability
• Available in lengths up to 4000 mm
|Working distance||20 – 50 mm|
|Material||Extruded PVC and epoxy resin|
|Working temperature||0 – 60 °C|
|High tension cable||2 meters standard|
|Working voltage||0 – 40 kV DC|
|Option||Tips step 5 or 10 mm 90° connector|